Karya Nusatama: Jual Lutron RGB-1002 |45° /0° Color analyzer

Jual Lutron RGB-1002 |45° /0° Color analyzer

* Measuring sample : no lighting sample
( textiles, paper, leathers... ).
* Measurement value : RGB value, HSL
value ( Hue/Saturation/Luminance ).
* 45° /0° color measuring geometry.
* Used the spectral analysis method to
determine the color of the sample
* Complete set included the color probe
and the meter, display the
measurement value from
* LCD display, show RGB or HSL
value at same time.
* Power : 006P DC 9V battery.
* Meter size : 203 x 76 x 38 mm.

* The RGB-1002 is a portable color analyzer equipped Measurement RGB value
with an external sensor probe having a 45° /0° color R ( Red ) value : 0 to 1023.
measuring geometry. The modem, accurate G ( Green ) value : 0 to 1023.
microprocessor technology uses the spectral analysis B ( Blue ) value : 0 to 1023.
method to determine the color of the sample. HSL value
Excellent repeatability due to spectroscopic analysis Hue value : 0 to 1.000.
technique used. Saturation value : 0 to 1.000.
* Friendly operation, just press the operation button will Luminance value : 0 to 1.000.
get the color value ( R, G, B or H, S, L ). Repeatability R (Red) value < 3
* Relative function, can easy to compare the color value G (Green) value < 3
of the different two measurement material. B (Blue) value < 3
* The RGB-1002 is designed mainly for measuring the Hue value < 0.01
color of no lighting sample such as textiles, paper, Saturation value < 0.01
leathers, painting materials...... It is the useful tool for Luminance value < 0.01
the quality control and the wide industrial application. * Repeatability is specified under the
* The color analyzer also can measure the reference same sample tested 10 times within
lighting sample color value such as CRT, LCD monitor, two minutes.
LED lamp, lighting lamp..... * Accuracy is specified under after the
* For no lighting sample color measurement, a defined instrument is calibrated.
light source illuminates the sample and the reflected Measurement Type 1 : No lighting sample material :
surface light is spectrometrically analyzed. sample Such as textiles, paper, leathers...
* For lighting sample color measurement, the light material Type 2 : Lighting sample material :
source of sample is spectrometrically analyzed directly. type Such as CRT, LCD monitor,
* RS232 computer interface, can store the measuring LED lamp, lighting lamp.....
color value in the computer for recording and the * The RGB-1002 is designed mainly for
further color analysis. measuring the color value of type 1 ( no
* Build in CAL ( Calibration ) button, for no lighting lighting sample ). For the type 2 ( lighting
sample measurement, use the included white color sample ) color measurement just for the
calibration card to make the self calibration easily. reference only.
* Hand held housing case, easy to carryout. Buttons OP button ( Operation button )
* Power supply by 006P DC 9V battery or DC 9V adapter. CAL button ( Calibration button )
REL button ( Relative button )

2. APPLICATION RGB/HSL button (Select RGB or HSL value )
* To check the color value of textiles, paper, leathers, Light ON/OFF button
painting materials. * No lighting sample measurement,
* The objective quality control of color during select the sensor light to on.
production. * Lighting sample measurement,
* The color measurement and recording of products select the sensor light to off.
supplied by supplier to check for conformity Power off Auto shut off saves battery life or
specification. manual off by push button.
* The comparison of color samples against color * Power will off automatically after
standard. 3 min., if no buttons be pressed.
* The interpretation and statistic evaluation of color Low battery Low battery indicator.
sample measurement. Computer RS 232 PC serial interface.
* To check the reference color value of CRT monitor, interface
LCD monitor, light lamp. Operating 0 ℃ to 50 ℃ ( 32 ℉ to 122 ℉ ).

3. SPECIFICATIONS Operating Less than 80% RH.
Display LCD size : 59 mm x 34 mm. Humidity
Measuring 45° /0° - circular illumination at 45° , Power Supply DC 9V battery, Alkaline type
geometry measurement at 0° . 006P, MN1604(PP3) or equivalent.
Spectral range 400 nm to 700 nm. DC 9V adapter input.
Light source Two white LED lamp. @ AC/DC power adapter is optional.
Measuring For no lighting sample color Power Current Standby : Approx. DC 6.3 mA.
principle measurement such as textiles, paper, Measurement : Approx. DC 32 mA. ( 2 SEC. )
leathers, painting materials......, a Weight 478 g/ 1.05 LB.
defined light source illuminates the * Main instrument and the sensor probe
sample and the reflected surface light is Dimension Main instrument : 203 x 76 x 38 mm
spectrometrically analyzed. Sensor probe : 160x92x45 mm
* For lighting sample color measurement, Accessories Instruction manual........................ 1 PC.
the light source of sample is Included Sensor probe ( RGB-1002P ).......... 1 PC.
spectrometrically analyzed directly. White color calibration card........... 1 PC.
Color 3 color photo transistors : Carrying case, CA-06..................... 1 PC.
sensors Red photo transistor Optional * AC to DC 9V adapter.
Green photo transistor Accessories * RS232 cable, UPCB-02.
Blue photo transistor * USB cable, USB-01.
Calibration Self calibration. * Data Acquisition software,
* The calibration white calibration card SW-U801-WIN.
is included.

0 komentar:

Posting Komentar


Lacak resi JNE di sini
Lacak resi TIKI di sini:
Lacak resi POS Indonesia:

Hubungi Kami

Senin - Sabtu | 08.00 - 17.00 WIB

(021) 49722859

Hotline : 085880111657(Tlp/SMS/WA)
Marketing 1 : 081223989651 / 087771753351
Marketing 2 : 08817685435 / 085701550255

BBM : 236A5664
Email : sales@tokokaryanusatama.com

Email : karya_nusatama@yahoo.co.id

Email : yogakarya3@gmail.com

Copyright © 2013. Masgus-store Premium Free - All Rights Reserved
Design by Gusti Putu Adnyana Powered by IdBlogsite