Rp 6.950.000,00ORDER

Portable Depth Sounder Plus Kabel Hondex PS-7FL

Diskripsi Produk

In the box:

PS-7FL, Portable LCD Digital Depth Sounder with floating sensor, 200Khz

Descriptions:

50m WATERPROOF

Unique portable sounder contains a dry cell and a transducer inside.

It is used for marine diving, fishing on the small boat or measurement of water depth with 50m waterproof and antiimpactness.

OPERATION BY DRY CELL BATTERY

You can operate with dry cell battery 006P.

Auto power off function turns off the power automatically about 10 seconds after you release the power switch.

INNER LIGHT

During sliding the switch on, the display is lit up by built-in light.

So you can operate the unit in the night time.

EASY OPERATION

Distance can be measured by pointing the sensor toward the object and sliding the power switch only.

Backlight display helps the easy operation during night time.

FEATURES:

– LCD Display 7 segment

– Battery: Dry Cell 006P (included)

– 200 kHz

– Beam 24º

– Waterproof: 50 mts

– Operating Voltage: 9 Volts

– Auto switch off: 210 seg

– Authonomy: 500 uses

– Transducer cable: 10 mts

– Min Depth: 0.60 mts

– Max Depth: 80 mts

– Size: 198 x 42 mm

– Weight: 190 gr

Jual Portable Depth Sounder Plus Kabel Hondex PS-7FL

DETAIL ORDER

Rp 4.600.000,00ORDER

Hondex PS-7 Depth Sounder Tanpa Kabel

Diskripsi Produk

Descriptions:

50m WATERPROOF

Unique portable sounder contains a dry cell and a transducer inside.

It is used for marine diving, fishing on the small boat or measurement of water depth with 50m waterproof and antiimpactness.

OPERATION BY DRY CELL BATTERY

You can operate with dry cell battery 006P.

Auto power off function turns off the power automatically about 10 seconds after you release the power switch.

INNER LIGHT

During sliding the switch on, the display is lit up by built-in light.

So you can operate the unit in the night time.

EASY OPERATION

Distance can be measured by pointing the sensor toward the object and sliding the power switch only.

Backlight display helps the easy operation during night time.

FEATURES:

- LCD Display 7 segment

- Battery: Dry Cell 006P (included)

- 200 kHz

- Beam 24º

- Waterproof: 50 mts

- Operating Voltage: 9 Volts

- Auto switch off: 210 seg

- Authonomy: 500 uses

- Transducer cable: 10 mts

- Min Depth: 0.60 mts

- Max Depth: 80 mts

- Size: 198 x 42 mm

- Weight: 190 gr

Jual Hondex PS-7 Depth Sounder Tanpa Kabel

DETAIL ORDER

 FEATURES

● Protection class: IP65.

● 8 voltage settings: 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and 275kV.

● High bright LED visual indication.

● Sound indication.

● Easy-to-prove method.

● Self-test selection.

● Use 3 × 1.5V “C” batteries.

● High impact nylon casing.

● Non-contact work by proximity.

● Compatible with most link sticks.

● Lightweight, robust, & compact.

● Suitable for indoor and outdoor use.

● Detects low voltage on any systems.

● Easy access to batteries.

● No special parts needed.

● Meets EN 61326-1  CISPR 11  EN 61000-4-2  EN 61000-4-3

● United States Design Patent : US D474, 705 S

● Special ranges are available upon request.

Spesifications:  8 voltage settings  240Vac, 2kV, 6kV, 11kV, 22kV,   33kV, 132kV, and 275kV.  Operating temperature  -15°C~55°C  Storage temperature  -20°C~65°C  Humidity  93% R.H. @ 40°C  Case Height  260mm  Case Width  96mm  Weight  Approx. 550g (batteries included)  Power source  1.5V “C” × 3 Alkaline Batteries  Safety standard  EN 61326-1  EN 61000-4-2  EN 61000-4-3  EN 55011

Selain produk tersebut kami juga menyediakan peralatan sbb:

Red Hand Flare Signal “GOOD BROTHER”

Self Igniting and Activating Smoke Signal “GOOD BROTHER” 

Line Throwing Appliance “GOOD BROTHER”

Non Contact High Voltage Detector SEW 275HP ( 240VAC ~ 275kVAC )

DETAIL ORDER

Kami jual viscometer rion vt-06 di jakarta, dengan spesifikasi sbb:
The VT-06 is designed for quality control applications in the manufacturing process of
industrial products such as petrochemicals, paint, and adhesives, as well as foodstuffs.
Viscosity measurements covering a wide range are possible, such as gear oil used in construction machinery. Measurement is performed by simply submerging a rotor in the fluid. The resistance to rotor movement caused by the viscosity (torque) is measured to obtain direct readings.

Selain jual viscometer rion vt-06 di jakarta adalah sbb:

Jual Tang Crimping Hidrolik YQK-120 di Jakarta Selatan

Jual Kunci Ring Pas Set 10 Pcs Sata Tools 08006

Jual Viscometer Rion VT-06 di Jakarta

DETAIL ORDER

Jual Frequency Meter SACI

Pointer frequency meters

FC2A_- FC2C_

Frequency meter 144x144mm

Product details

FC5A_- FC5C_

Frequency meter 48x48mm

Product details

FC4A_- FC4C_

Frequency meter 72x72mm

Product details

FC3A_- FC3C_

Frequency meter 96x96mm

Jual Frequency Meter SACI

DETAIL ORDER

SmokeSabre is a major step forward in the design of aerosol smoke detector testers. All other pressurised aerosol smoke alarm testers have the inherent drawback that, if used too close to the detector, they leave harmful residue on the casing and / or inside the chamber of the detector. This residue can discolour the casing, can attract dust, affect sensitivity and, in some cases, lead to corrosion, cracking or even complete failure of the detector. SmokeSabre inhibits use too close to the detector and eliminates harmful residue while focussing and targeting the canned smoke test gas. When SmokeSabre is in the closed position the sabre prevents access to the spray button. You can spray only when the sabre is fully extended. In use, air is drawn through the holes in the sabre and this, coupled with the venturi effect involved, assists the velocity and vaporisation process of the airborne ‘smoke’ particles. The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while eliminating harmful residue. SmokeSabre is a universal test product covering the sensitivity range of all smoke detectors (see particle size comparison chart). The extending sabre is made of 100% biodegradable plastic making SmokeSabre the only smoke detector test aerosol to be both recyclable and eco-friendly*. SmokeSabre is UL listed, meets global testing standards, and is approved by major smoke detector manufacturers.

ADVANTAGES   • More tests per can   • Faster detector activation and clearing   • Lowest cost per test   • The end of harmful residue - risk is designed out with the sabre   • Silicon free testing   • Eco-responsibility - 100% bio-degradable sabre, ozone friendly, no CFCs and GWP free propellant*   • Detector manufacturer endorsement and UL Listing   • 150ml can

Using SmokeSabre Testing with SmokeSabre aids compliance with codes and standards globally. “Point smoke detectors should be functionally tested by a method that confirms that smoke can enter the detector chamber and produce a fire alarm signal (e.g.: by use of apparatus that generates simulated smoke or suitable aerosols around the detector). It should be ensured that the material used does not cause damage to, or affect the subsequent performance of, the detector...” BS5839 1: 2002; 45.4 (D) “...the detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.” NFPA 72 Chapter 10 (10.4.2.2 3g)

Jual PasTi Smoke Tester ^SmokeSabre ^

DETAIL ORDER

Features :

• Tests whether fluorescent lamps and light bulbs are operational prior to installation or removal
• Features built-in VolTect alert to verify voltage presence and eliminate the need to carry a separate voltage detector
• Offers single-handed, one-button operation for all lamp tests
• Provides a pin test to check the continuity of the bulb’s electrodes
• Features ultra-compact design for easy portability
• Includes a 48 removable, fully retractable antenna to test lights without climbing a ladder
• Emits visual and audible alerts for pin and voltage test functions
• Works with all fluorescent light bulbs: T2, T4, T5, T8, T9, T10, T12
• Includes 48 antenna, adaptor plate, users manual, battery and carrying case

Spesifications:

Specifications
Compatible lamps	T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage	Approximately 3 kV / 280 kHz
Field strength	Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length	48"
Filament test	T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection	AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V
Supplied with	48" antenna, adaptor plate, users manual, battery and carrying case

Specifications	Range
Compatible lamps	T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage	Approximately 3 kV / 280 kHz
Field strength	Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length	48"
Filament test	T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection	AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V
Non-contact voltage sensitivity with probe tip (typical)	LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof	36"
Operating time	One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement
Operating temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude	Up to 2000 meters
Battery	One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life	Up to 500 tests (Alkaline typically)
Dimensions (L x W x H)	Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight	Approximately 80 g (0.18 lb) with battery installed, excluding 48" antenna
Safety compliance	IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
EMC compliance	IEC 61326-1
Certification	CSA and CE
Calibration	NA

Jual Amprobe LT-10 Stick Lamp Tester

DETAIL ORDER

Features:

• Bulb lights when circuit is completed
• For use with unenergized circuits

Jual Baru Amprobe PY-11 Continuity Tester

DETAIL ORDER

The rugged Amprobe INSP-3 Wiring Inspector Circuit Tester verifies in seconds whether a building’s wiring (including voltage drop under load) complies with electrical code. This saves time and money by eliminating guess work. The large display shows all relevant test data so you can quickly identify issues with splices, connections, and conductor quality that are crucial to safety and performance, without scrolling or switching screens. Select a 10, 15, or 20 amp load on the electricity tester then read the results. A flashing screen clearly indicates incorrect wiring or failures. This wire tester won’t trip circuit breakers or blow fuses during the test.

Features:
Presents relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) on a single large display to save operator time. No scrolling or switching screens needed
Verifies that wiring tested for load carrying ability meets electrical code recommendations for voltage drop under load
Detects faulty wiring without removing outlets cover plates or panel covers
Finds most common wiring problems, including:
Faulty splices and connections
Incorrect wiring
Undersized wiring
Faulty GFCIs
Faulty or incorrectly wired AFCIs
Incorrect line voltage
Poor ground quality
Flashing screen clearly indicates incorrect wiring or voltage drop test failure
Offers user-selectable 10, 15 and 20 amps load testing to verify electrical system performance
Will not trip circuit breakers or blow fuses during the test
Checks grounding quality for safety and the ability to support sensitive electronic equipment
Measures fault currents
Tests GFCI and AFCI operations
Includes power cord, 9V alkaline battery (Installed), users manual, and carrying case

FEATURE INSP-3 Best Accuracy Load: Constant 10, 15 or 20 AMP simulation regardless of line voltage - Operating voltage: 95 VAC → 140 VAC +/- 2 % + 2 digits GFI trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD - AFCI trip: Up to 8, 120 AMP pulses within 1/2 second period - Specifications Load: Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage Operating voltage: 95-140 VAC +/-2%, +/- 2 digits GFI trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD AFCI trip: Up to 8, 120 AMP pulses within 1/2 second period For complete specs please download the product datasheet under the “Resources" tab.

Jual Amprobe INSP-3 Wiring Inspector Circuit Tester

DETAIL ORDER

Summary:	Solarimeter 2 wire transmits 0-10 V or 4-20 mA analogue signal proportional to the radiated solar power via the interface connected to a PLC or a data acquisition system
Specification:	For a comprehensive product specification please view or download and print the Kimo CR 100-A Data Sheet or User Manual located in the Product Details pane on the Product tab. Please contact one of our customer service specialists for a prompt response for any additional information that you may require. Please remember that we are here to help you!
Availability:	This product is obtainable direct from InstrumentCatalog™ at www.InstrumentCatalog.com.au or by calling +61 8 7200 4511
Trademarks:	Product names, logos, brands, and other trademarks featured or referred to within this website are the property of their respective trademark holders. These trademark holders are not affiliated with this website.

	Please click to view, download or print the Brochure, Data Sheets, User Manuals or Video for this product. Please note that not all products have all linked Downloads associated with them.

Jual KIMO CR100 Solarimeter

DETAIL ORDER

Product Description
For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000′ (300 m) outdoors, line of sight; typical range through walls under most conditions is 200′ to 400′ (60 to 120 m). Includes AC power adapter. (Photograph shows US version.)

Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations.
Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro.

Jual Davis 7626 AC-powered Wireless Repeater

DETAIL ORDER

GE Druck DPI 740
Portable Precision Barometer

Features :

• Ranges to 103 inHg absolute
• Accuracy: ±0.004 inHg absolute
• 6 digit resolution LCD display
• Multiple pressure scales and aeronautical units
• Alkaline or rechargeable batteries
• Lightweight hand-held rugged design
• RS 232 output

Jual GE Druck DPI 740

DETAIL ORDER

Features

SYSTEM CHASSIS:
28 selectable pressure units and 4 user defined units
Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free
Contact options
Aeronautical option
High resolution colour touch screen operation
Intuitive icon task driven menu structure
Compatible with software packages
RS232, IEEE connectivity, Ethernet and USB as standard
Selection of Chassis and interchangeable control modules:
PACE6000 = Dual Channel Pressure Controller - System Chassis
Fits 1 or 2 Control Modules inside the system chassis = up to 2 Pressure Controllers
Single, dual or auto range control module configurations
PACE5000 = Single Channel Pressure Controller - System Chassis
Fits 1 Control Module inside the system chassis = 1 Pressure Controller
Same functionality as the PACE6000 just 1 controller instead 2

CONTROL MODULES
High speed pressure control (less than 10 seconds to set point with 0 overshoot)speed pressure control
Up to 210 bar (3000 psi/21 MPa) gauge & absolute
Long-term stability up to 0.01% rdg per annum
Barometric reference option
Negative gauge calibration included as standard
CM0 Control Modules (Standard Accuracy)
Accuracy = +/- 0.04% Full Scale
Gauge pressures with CM0
Gauge and absolute pressures with CM0-B
CM1 Control Modules (High Accuracy)
Accuracy = +/- 0.02% Full Scale
Gauge pressures with CM1
Include barometric sensor and you get gauge and absolute pressures with CM1-B
CM2 Control Modules (Premium Accuracy)
Accuracy = +/- 0.02% Full Scale
Gauge pressures with CM2
Include barometric sensor and you get gauge and absolute pressures with CM2-B

Jual GE Druck PACE 6000 Pneumatic Pressure Controller

DETAIL ORDER

Twin-channel pitot static test system accurately and rapidly verifies vital flight instrumentation for civilian or military aircraft
Features

• Enables vital flight instrumentation, including altimeters, airspeed indicators, rate of climb indicators, Mach meters and air data computers to be accurately and rapidly tested
• High accuracy, RVSM compliant
• Flightline and rack mount versions
• Civil and military specifications
• Integral or remote pressure/vacuum supplies
• Fully programmable for aircraft type
• Protection for aircraft instruments

JUal GE Druck ADTS 405

DETAIL ORDER

Measurement and spot check of solar power (W/m2).
Supplied with calibration certificate, transport case and data transfer software.

Technical data

• Instantaneous, average, min/max values, hold function
• Spectral response from 400 to 1100 nm
• Calculation of energetic exposure in Wh/m2
• Recorder values
• Solar irrigation measuring range : from 1 W/m2 to 1300 W/m2
• Energetic exposure measuring range : from 1 Wh/m2 to 500 kWh/m2
• Frequency of measurement : 1/s

Jual Kimo SL 200 SolariMeter

DETAIL ORDER

Multifunction KIMO AMI 300

• KIMO AMI300Large colour display
• User friendly navigation
• Interchangeable measurement modules
• Wirelless comunicaton
• Weight: 380g
• With calibration certificate

Accessories:
Pressure
- from 0 to ± 500 Pa
- from 0 to ± 2,500 Pa
- from 0 to ± 10,000 Pa
- from 0 to ± 500 mBar
- from 0 to ± 2,000 mBar
Current/Voltage module:
-from 0 to 2.5V
-from 0 to 10V
-from 0 to 4/20mA
Termocouple:
-K: from -200 to 1300 °C
-J: from -100 to 750 °C
-T: from -200 to 400 °C
Climatic conditions:
-relative humidity: from 5 to 95 % RH
-temperature: from -20 to +80 °C
-pressure: from 800 to 1100 hPa
Hotwire
-air velocity: from 0.15 to 3 m/s, from 3.1 to 30 m/s
-temperature: from -20 to +80 °C
-air flow: from 0 to 99,999 m3/h
Ø 100 mm Vane Probe
-air velocity: from 0.25 to 3 m/s, from 3.1 to 35 m/s
-temperature: from -20 to +80 °C
-air flow: from 0 to 99,999 m3/h
Ø 70 mm Vane Probe
-air velocity: from 0 to 3 m/s, from 3.1 to 35 m/s
-temperature: from -20 to +80 °C
-air flow: from 0 to 99,999 m3/h
Ø 14 mm Vane Probe
-air velocity: from 0.8 to 3 m/s, from 3.1 to 25 m/s
-temperature: from -20 to +80 °C
-air flow: from 0 to 99,999 m3/h
Pitot tube
-air velocity: from 2 to 5 m/s, from 5.1 to 100 m/s
-air flow: from 0 to 99,999 m3/h
Debimo blades
-air velocity: from 4 to 20 m/s, from 21 to 100 m/s
-air flow: from 0 to 99,999 m3/h
CO/CO2/Temperature/Hygrometry:
-CO: from 0 to 500 ppm
-CO2: from 0 to 5000 ppm
-temperature: from -20 to +80 °C
-relative humidity: from 5 to 95 % RH
High temperature hygrometry probe
-relative humidity: from 3 to 98% RH
-absolute humidity: from 0 to 600 g/Kg
-dew point: from -50 to +80 °C
-ambient temperature: from -40 to +180 °C

Jual Kimo AMI 300 Multifunction Meter

DETAIL ORDER

 

HELES DC AMPERE METER

Type : CR-45 0-10Amp

HELES DC Voltmeter

Type : CR-45 0-30V

Jual Heles CR-45 DC Ampere Meter/ DC Voltmeter

DETAIL ORDER

12" CHART RECORDERS MODEL RPP500

RUGGED
PORTABLE
MODULAR SYSTEM
IP-67
UPTO 4000 BAR/60.000 PSI
MAX. 3 PENS, ALSO FOR TEMPERATURE
EASY TO RENT OUT
STATE OF THE ART
Recorder

APPLICATION: OIL & GAS - ON- & OFFSHORE - PETROCHEMICAL

JUal RPP-500 Stiko Recorders Pelicase

DETAIL ORDER

Chart Recorders are the industry standard for accurate, reliable measurement and recording of pressure and temperature or a combination of those( max. 3-pens). 

Our RPP400 chart recorder utilizes a 9" chart (223mm) and is widely used in gas transmission and distribution fields requiring accurate calibration and recording. Many of our customers rent these units out due to its reliability and performance and due to the fact that the measuring systems are interchangeable. 
This modular system feature offers the opportunity to enable customers to have every range available in no-time.

APPLICATION: OIL & GAS - ON- & OFFSHORE - PETROCHEMICAL

Jual Stiko Pelicase RPP-400

DETAIL ORDER

Differential pressure transmitter 692

Differential pressure transmitter 692
0 ... 0.1 - 25 bar

The pressure transmitter of type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.

Jual Huba 692 Differential Pressure Transmitter

DETAIL ORDER