This compact gauge permits extremely precise and non-destructive measurements of lacquer and anti - corrosion protection coating thicknesses on steel and iron. Extended measuring range, memory and Min/ Max data recording functions make this device very useful for quality control of paint or coating thickness on ferrous metals.
IDEAL TOOL FOR ...
- Powder Coaters
- Paint Suppliers
- Paint Applicators
- Coating Inspectors
- Painting Contractors
- Quality Control Inspectors
ADDITIONAL FEATURES:
- Measures coatings on ferrous metals (Steel and Iron)
- Single & Continuous Measuring Mode Option
- Automatic power OFF switching
- Factory calibrated and ready for use
- Automatic error correction system
- ZERO set feature for non-standard surfaces
- System Accuracy Adjustment, Zero Point & Two Point Calibration
- Strong, wear resistant steel probe
- Large LCD Display
- Min / Max Measurement Data Recording
- Average / Standard Deviation Recording
- NEW FEATURE! Stores last 15 readings in a Memory (Measure now, compare all the results later)
- Single & Group Data Store and Delete
- Fast and accurate measurements
- Simple operation: No user calibration required
- Mils/Microns selectable. Displays readings in Metric (μm) or Imperial units (mil)
- Compact-sized for one hand operation
- Supplied with a set of plastic test shims
- Works with a single 9V battery
|
Fe-Probe: |
Measurement on ferrous metals: Steel & Iron |
|
|
Range: |
0.0 to 50 mils (0 to 1250 µm) |
|
|
Resolution: |
0.1 mils (2 µm ) |
|
|
Accuracy: |
± 0.1 mils + 3% (± 2 µm + 3%) of readings |
|
|
Temperature range: |
Storage: |
-10°C to 60°C (14°F to 140° F) |
|
|
Operation: |
0° C to 60° C (32° F to 140° F) |
|
Power Supply: |
Battery: 1 x 1.5V AAA Alkaline |
|
|
Dimensions: |
1.2" x 2.6" x 7.2" in. (30 mm x 67 mm x 183 mm) |
|
|
Weight: |
5.3 oz. (150 g) Including battery | |
0 komentar:
Posting Komentar